REQUEST A FREE QUOTATION AND SAVE £££’S
Just a Quote: Expert advice without the hard sell
DIY WINDOWS – Installing your own PVCu doorsFor DIY doors there is no shortage of companies prepared to sell windows and doors to homeowners who prefer to install them as a diy doors project. Suppliers carry no risk of measuring, surveying or installing the diy doors correctly and since most companies would insist on payment upfront for supply only transactions, they won’t suffer from bad debts either.
The other side of this is that there are plenty of risks for the homeowner to install their own doors and you should only do it if you are capable of the installation and you consider the cost saving to be worthwhile. However, there is a definite saving to be made with diy doors (about 30% to 50% should be achievable) and you may know someone who works for a PVCu door installation company who can fit them for you at weekends.
DIY Doors – A local PVCu door manufacturer or the internet?
There will obviously be a larger choice of companies to deal with if you search the internet for suppliers of DIY doors than there will be in your local area and there may be reputable companies from both sources. You can probably expect lower prices from companies which only sell over the internet but that could be at the expense of poorer service.
For DIY doors, Just a Quote will only introduce you to suppliers which are approved by Trading Standards
A few points to be aware of when considering DIY doors:
Measuring for diy doors
When measuring for new diy doors your chosen PVCu door manufacturer will require the final manufacturing sizes and that’s not just the external brick to brick dimensions. A fitting tolerance of 5mm to 10 mm all around the frame is generally required and care must be taken when there is a thick plaster line or tiled internal reveals. PVCu add-ons may be required to the sides or top of the new window or door where the plaster line is thicker than the outer frame.
This is particularly common for doors so that the hinges on the new PVCu door does not snag on the plaster. Also, don’t assume that the brickwork allows for a perfectly square or rectangular window – it may be wider at the top than the bottom for example.
Ordering your DIY doors
When ordering new DIY doors, check with your manufacturer whether they want internal or external views for the designs. A door opening the wrong way wouldn’t be satisfactory and neither would it be acceptable to be opening outwards when it should be opening inwards.
Building Regulations and FENSA
Replacing your home’s doors is subject to Building Regulation approval and avoiding compliance can only lead to problems at a later date. Paying a FENSA registered company to install them is the simplest way of dealing with compliance with Building Regulations but if you are installing the windows and doors yourself you will need to deal with the local Building Control Department – and there will be fees and possibly an inspection of the work.
Building Regulations cover a number of issues, including the structure of the windows, when safety glass and trickle ventilation is required, the energy efficiency of the new windows and doors, fire safety, the amount of ventilation, and disabled access. Your local Building Control Department can insist that a window or door which does not meet current Building Regulations must be changed for one which does.
Guarantees for DIY doors
Finally, although it may seem obvious, new PVCu doors bought for a DIY windows project will only carry the manufacturer’s guarantee, there will be no guarantee on the installation. If you, or a friend who installs the doors make a mistake on the installation, you will have to put it right yourself…..and that may require a new insulating glass sealed unit, a PVCu door panel or another new PVCu door.